Curtis OL 512 User Manual download pdf (Page 36)

CAP-215

Instruction Manual Oil-Less Compressors

8. INSTALLATION OPERATION

8.1. INSTALLATION OF THE COMPRESSOR

Remove all plastic protective plugs and caps before Installing compressor.

The oil-less compressor should be installed so that there is no vibration, e.g. from the drive motor.

- If possible install compressor in such a manner that the compressor fan can get fresh air from outside, for

instance through an opening in the wall.

- Ensure that an adequate exhaust air opening is provided (see Fig. 16).

- When locating the compressor in rooms of less than 39.2 cu. yd. space where natural ventilation is not

ensured, measures must be taken to provide artificial ventilation (this also applies when other systems having

high radiation are operating in the same room (see Fig. 17).

Artificial ventilation is effected by installation of a fan in the exhaust air opening.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 51 52

No comments

Curtis OL 512 User Manual Page 36