8
CAP-215
Instruction Manual Oil-Less Compressors
1.2. DESIGN AND MODE OF OPERATION
1.2.1 DESIGN
The design of the oil-less compressor is
shown in Fig. 1 to Fig. 4. For drawings
refer to the annex of this manual.
Fig. 7: Position of stages at 2-stage
compressor
1.2.2. Mode of Operation
1-stage compressor
The positions stated refer to Fig. 1.
The outside air is drawn in through the three first stages (3) of the oil-less compressor via intake filter, crankcase and
piston and compressed to a final pressure of max. 110 psi
a)
. The compressed air is cooled back to the original
temperature in the after-coolers (2) and is then lead to a manifold (1). After that it reaches the final separator (6), where
the condensate is filtered out. The condensate is drained regularly by the automatic condensate drain (8)(option)
Comments to this Manuals