Curtis WF-037a User Manual

Scouting Camera User’s Manual Model: WF-037a

4. Memory Options. You Scouting camera is comes 16MB built in flash memory, the camera is also equipped with an expendable media card slot capable acc

the SD card prior use in Scouting Camera. New cards are good to use straight from the package. Display, Controls and Programming. 1. Status Icons on

• Time out: To set the time amount of time the camera will sleep between PIR triggering. • Auto Flash: If the brightness is lower then EV 12. the un

a 2.0M pixels image. o 1280 x 1024 1.3M: Select this option to capture a 1.3M pixels image. o 640 x 480 VGA: Select this option to capture a

Please replace with new batteries; otherwise the camera will not work properly. • Day and Time: It shows the date and time that you have set. 2. Con

• Wake up the unit during PIR detection. By pressing the [UP] or [DOWN] button 2 seconds to wake up the unit inter preview. 3. Settings on Preview.

¾ If no buttons are pressed within 30 seconds, the unit will return 1minute count down mode then start PIR capturing. 3.2 Set the Resolutions: • Pow

3.3 Set the Time out: • Power on the unit, press the [MENU] button to call out the menu. • Press the [UP] or [DN] button to move the highlight to TI

• Press the [UP] or [DN] to set the TV output in NTSC or PAL system. • Press [CONFIRM] to confirm, then press [MENU] to exit. 3.5 Set Date and Time.

¾ Date Time Stamp to stamp the date and time on the captured image. 4. Settings on Playback. Set the functions during TFT in playback status. 4.1 Se

Open view image with major parts indication

• Press the [CONFIRM] button to enter the DELETE ALL. • Press the [UP] or [DN] button to select YES or NO • Press [CONFIRM] to confirm the deleting

An image shows how the mount the Scouting Camera to a post or tree. 2. Mounting suggestions. • Camera should be mounted between 4 to 6ft from t

• Clear and branches or debris away from the camera lens and PIR. ¾ In order to obtain proper weather resistance, please make sure that both door l

• After the font LCD screen has powered on. Press the [TEST] button (this must be done with in 30 seconds or the camera will enter count down mode) •

minute to leave the coverage area. Then the camera will enter PIR detection mode. b. After 5 minutes in test mode, the camera will then enter count d

• After 30 seconds the camera’s green test light will begin blinking and enter count down mode. This is your indication to leave the coverage area wi

lighting conditions. If the lighting conditions are not enough, unit will switch the AVI to single image capturing automatically. ¾ When using the AV

• A TV icon will appear on the TFT display. • Turn on the Monitor. • Image will be display on the TV screen. • At the bottom of the screen will be

• A TV icon will appear on the TFT display. • Turn on the TV and select source to video in. • Image will be display on the TV screen. • At the bo

• Plug the other end of USB cable into the camera. The camera will automatically power ON and display a USB icon on the LCD screen. • At the same t

Bottom view Side view with major parts indication

correct before connection. Incorrect voltage or polarity will damage the camera. If you are not sure, please contact your retailer. Maintenance 1. St

container when it is NOT used. • Take the batteries out, when the Scouting Camera is NOT to be used over a long period. • Avoid dropping the Scouti

bit) or above: • Click the Windows Start button. • Click settings and then Control Panel from the pop-UP MENUs. • Double click the Display icon.

• You have used the SD card in other digital devices (the format of the SD card might have changed when using other devices due to un-standard format

¾ If you have any questions regarding your PC specifications please call your PC manufacturer. 2. Camera Features and Specification. • Image sens

• Battery low indicator. • TV out support for NTSC and PAL system. • Focusing: 1.5m min to Infinity. • High precision 6 P glass lens with IR coat

Safety. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmf

used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference wi

Attention. The software CD-ROM packaged with the camera is designed for PC’s only. Playing this CD-ROM on a stereo or CD player may cause damage to it

Getting to know your Scouting Camera 1. Package contents. Please check if the following items are in the package when purchasing this product. • CDR

2. Software installation. • Unplug the USB cable from PC. • Insert the CDROM in CD driver of your PC. • The auto-run program will execute. • Follo

¾ If your computer dosen’t run automatically, please click “Start” button and choose “Run”, and then browse the CD drive and click “Setup”. ¾ Opera

3. Battery and SD memory card installation. • Open the front cover. • Slide the power switch to OFF. • Open the battery door. • Put the battery

• Push the SD memory card in to the SD card slot till the end and in the correct direction as shown. • To remove the SD memory card by press the SD