Curtis IP1134UK User Manual download pdf (Page 5)

Playing and charging your iPod

NOTE:Before plugging your iPod in the dock, snap the suitable insert into the dock to provide a snug fit for

the player to be docked.

1. Snap the compatible iPod into the dock connector.

2. Position the FUNCTION SELECTOR on iPod.

3. Then, iPod will playback automatically.

→ By using the buttons (MENU, SELECT, PLAY/PAUSE, SKIP+/- , iPod SCROLL UP/DOWN,

FOLDER UP/DOWN and VOLUME) and its remote control, the following disc playback features

are available: Play/Pause, selecting next/previous track and changing volume.

4. Turn Volume Control to adjust the sound level.

5. Press off button on your iPod to turn off iPod.

NOTE: If your dock an iPod with a drained battery, it may take up to 6 minutes of charging before the iPod

will respond.

iPod operation

ENG-10

1st Gen Nano

iPod Mini

Thin iPod

iPod nano 2GB/4GB

iPod mini 4GB/8GB

3rd nano 4GB/8GB

5th 30GB

iPod classic 80GB

iPod touch 8GB

ENG-9

iPod Mini

1st Gen Nano

Thin iPod

CD Player Operation

CD PLAYBACK

The CD player supports audio discs, CD-R and CD-RW. Do not attempt to read CD-ROM, CDi, VCDs, DVDs or

data CDs.

Note: Even if this portable radio-CD player is able to read CD-R and CD-RW discs, in addition to conventional

compact discs, it is not possible to offer a 100% guarantee that all CD-R/RW discs can be read; playback

depends on the quality and condition of the blank discs that you use, among other things. A playback failure

does not necessarily indicate that the unit is malfunctioning.

1. Position the FUNCTION SELECTOR on CD (the display unit briefly displays - - -).

2. To open the CD player door, raise it by the corner marked OPEN/CLOSE.

3. Insert a CD, CD-R or CD-RW disc, printed surface facing upwards and gently press the CD player door

to close it.

4. Start playback by pressing PLAY/PAUSE.

5. Press PLAY/PAUSE to interrupt or resume playback.

6. To stop CD playback, press STOP.

NOTE: CD playback stops automatically when:

the CD compartment is opened;

the radio function is selected;

the CD is finished.

SELECTING A DIFFERENT TRACK

During playback, press NEXT or BACK on the unit or remote control unit to select a track.

If you have selected a track number in Stop or Pause mode, press PLAY/PAUSE to resume playback.

Briefly press NEXT to pass to the next track or press NEXT several times until the desired track number

appears in the display.

Briefly press BACK to return to the start of the current track.

Press BACK several times to find a previous track.

SEARCHING FOR A PASSAGE ON A TRACK

1. Press and hold BACK or NEXT to read the track in fast forward mode at reduced volume.

2. When you have found the desired passage, release the BACK or NEXT button(normal playback

resumes automatically).

REPEAT

Repeat: playback of the current track continuously.

Repeat all: playback of the entire CD continuously.

Random: playback in the random continuously.

PROGRAMMING OF TRACK NUMBERS

Up to 20 tracks can be programmed in any order. If desired, a given track can be programmed more than once.

1. In STOP mode, press BACK or NEXT to select a track.

2. When the desired track number appears, press the PROG button once to record the track (the display

unit displays "prog", briefly followed by the track number selected).

3. Repeat steps 1 and 2 to select and program the desired tracks.

4. To start playback of your programmed tracks, press PLAY/PAUSE.

PROGRAM CHECK

In STOP mode, press the PROG. button. (the display unit displays the track numbers in the order

programmed).

DELETING A PROGRAM

Perform the following operations to delete the memory:

Open the CD door;

Select the RADIO source;

Press STOP once.

1 2 3 4 5 6 7

Comments to this Manuals

No comments

Curtis IP1134UK User Manual Page 5

Comments to this Manuals

Related products and manuals for PDAs Curtis IP1134UK