Curtis LED1930A User Manual download pdf

Operating Instructions for

CLIKR

™

-5

Cable Remote Control

UR5L-8700L-IP

Universal Remote Control, Inc.

www.universalremote.com

OCE-0060G REV 04 (02/26/10)

Operating Instructions for

CLIKR

™

-5

Cable Remote Control

UR5L-8700L-IP

(888) 218-5050 • www.ftcvision.com

3/11

BUTTON FUNCTIONS

POWER

Allows you to turn your TV, VCR,

DVD, AUX and Set-top Box On and Off.

AUX, DVD, VCR, TV, STB

Used to select the component you want

to operate and signals remote control actively.

INFO

Displays information about the program currently

playing or highlighted in the program guide.

EXIT

Exit from the current screen.

PAGE +/-

Navigate to and highlight an item from

the on-screen choices.

CURSOR NAVIGATION PAD 5,6,3,4

Navigate to and highlight an item from

the on-screen choices.

B, C, D

Available for future use.

CHANNEL 5,6

Select the next higher or lower channel.

LAST

Returns to the previously tuned channel.

INTERACTIVE

Available for future use.

SKIP

Forward ahead in stored or recorded programs.

VCR/DVD/VOD KEYS

Perform standard VCR and DVD functions when

in VCR and DVD mode, and Video-On-Demand

functions when in STB mode.

NUMBER PAD

Enter numbers to tune to channels. Also, make

numeric entries on on-screen menus.

Note: You can also use 5/6or the program guide as alternate

ways to tune channels.

ASPECT/ENTER

Allows access to viewing options, including aspect

ratios, audio languages and subtitles.

PIP CH +/-

Available for future use

MOVE

Available for future use

LIGHT BUTTON

Press to backlight all keypad buttons. Press again to turn

off (or simply wait 10 seconds for automatic shut-off).

SYSTEM ON/OFF

Available for future use

Displays the Applications Menu.

GUIDE

Displays the program guide listings

OK/SELECT

Selects highlighted screen options

SETTINGS

Available for future use

MUTE

Silences the audio. Press to activate.

Press again to restore sound to the previous level.

VOLUME 5/6

Raises or lowers the sound level.

FAV

Available for future use

ON DEMAND

Provides direct access to On Demand channel.

BACK

Return to previous menu screen or TV channel

M BUTTONS

Available for future use

REPLAY

Replays the previous few seconds of a program.

MY DVR

Digital Video Recording

DELETE

Edit text on the screen.

ON-OFF

Opens or closes the PIP (Picture-In-Picture)

window through the IPTV STB.

VIDEO SOURCE

Selects the video source from available video

components through the IPTV STB.

SWAP

Available for future use

Allows you to select available aspect ratios through the STB.

Install two

AA alkaline

batteries,

as shown.

Note: If the 3-digit code number you just entered

is correct, the component will turn off. If it did

not turn off, continue entering code numbers

listed for that brand until the component turns off.

Step 4: After you’ve entered the correct code

number and the component has turned off, press

the [POWER] button to turn the component

back on. Now it is time to test the VOLUME and

MUTE buttons for the TV (or PLAY and STOP

buttons for VCR and DVD) to make sure they

all work. If any of the functions do not work

as they should, repeat from STEP 3 using the

next 3-digit code number listed for that brand

until you find the best component code.

STEP 5: Once you have found the correct

3-digit code, save it by pressing the same

[COMPONENT] button one more time. The

component LED light will blink twice to conrm

that the code was successfully stored.

Now, program the rest of your components

by repeating STEPS 1-5.

Note: If the Pre-Programmed Method did not

work, or if the Code Tables do not list your

component brand, use the Auto-Search Method

as explained in Section B.

B. Auto-Search Method

STEP 1: Turn on the component you want to

program (TV, VCR, DVD or AUX).

STEP 2: Press the [COMPONENT] button (TV,

VCR, DVD or AUX) to be programmed and

[OK/SEL] button simultaneously for 3 seconds.

The component LED light will turn on for 30

seconds, indicating the unit is ready to be

programmed.

STEP 3: Point the remote toward the component

and press the [CH5] or [CH6] button one step

at a time or keep it pressed. The remote will

emit a series of ON/OFF commands. Release

the [CH5] or [CH6] button as soon as the

component turns off.

STEP 4: Test functions. (Same as for 3-Digit

Code Programming Method - Section A). If any

of the functions do not work as they should,

repeat from STEP 3 using [CH5]or [CH6]

buttons to nd the correct code.

STEP 5: Save the code. (Same as for 3-Digit

Code Programming Method - Section A).

Now, repeat the Auto-Search Method for those

components you could not program earlier with

the Pre-Programmed Method. If you can’t find

the right code using the Auto-Search Method,

try the Learning Method in Section C.

C. Learning Method

STEP 1: Press the [COMPONENT] button (TV,

VCR, DVD or AUX) to be programmed and

the [ASPECT] buttons simultaneously for 3

seconds until the component LED light turns on.

STEP 2: Line up the CLIKR™-5 to the other

remote, head-to-head, 1 or 2 inches apart.

STEP 3: Press any button on the CLIKR™-5

that you want to teach a command to. For

example, if you want to teach the [MUTE]

button, press the [MUTE] button.

STEP 4: Press and hold the [MUTE] button

on the other remote until the CLIKR™-5

component LED light blinks twice.

Note: The LED will blink 5 times if there was an

error in the learning process. If so, repeat STEPS

3 and 4. Continue learning other buttons by

repeating STEPS 3 and 4.

STEP 5: Once you have completed teaching

CLIKR™-5 all desired commands for that

component, save the learned commands by

pressing the [COMPONENT] and [ASPECT]

buttons simultaneously until the component

LED blinks 3 times. Now test all the buttons to

make sure they learned correctly.

D. Erasing a Single

Learning Command

STEP 1: Press the [COMPONENT] and

[ASPECT] buttons simultaneously for 3 seconds

until the component LED light turns on.

STEP 2: Press and hold the button you want to

erase for 3 seconds. The component LED will

blink twice to conrm the erasure.

STEP 3: To exit, press and hold both the

[COMPONENT] and [ASPECT] buttons

simultaneously until the Component LED blinks

3 times.

E. Erasing all Learned

Commands from One Component

STEP 1: Press the [COMPONENT] and

[ASPECT] buttons simultaneously for 3 seconds

until the component LED light turns on.

STEP 2: Press and hold both the [COMPONENT]

button you want to erase and the [PAUSE]

button for 5 seconds. The component LED will

blink twice to conrm the erasure.

STEP 3: To exit, press and hold both the

[COMPONENT] and [ASPECT] buttons

simultaneously until the component LED blinks

3 times.

F. Finding a Component Button’s

Setup Code Number

If you used either the Auto-Search or Learning

Methods to program a component, you may not

know what the correct code number is. Here is a

way for you to identify the code number, so you

can record it for future reference.

STEP 1: Press the [COMPONENT] button (TV,

VCR, DVD or AUX) you want to verify and the

[OK/SEL] button simultaneously for 3 seconds.

The Component LED light will turn on for 30

seconds.

STEP 2: Press the [INFO] button and count

the number of times the Component LED light

blinks. This number indicates the rst digit of

the code, followed by the second and third, each

separated by a 1

second pause when the LED

will turn off.

Note: 10 blinks represents the number zero.

Example: One blink (pause), eight blinks (pause)

and three blinks indicates code number 183.

G. AUX Function:

Programming a Fifth Component

You can take advantage of the AUX function to

program a 5th component, such as a second TV,

VCR, DVD or Audio component.

STEP 1: Turn on the fth component you want

to program (TV, VCR, DVD or Audio).

STEP 2: Press the [AUX] button and the [OK/

SEL] button simultaneously for 3 seconds. The

[AUX] Component LED will turn on for 30

seconds.

STEP 3: Press the [COMPONENT] button you

want to set up. Point the remote control toward

the Component and enter the 3-digit code

number assigned to your brand.

Note: If the 3-digit code number you just entered

is the correct number, the component will turn

off. If it did not turn off, continue entering code

numbers listed for that brand until the component

turns off.

STEP 4: Test functions. (Same as for Pre-

Programmed 3-Digit Code Method - Section

A). If any of the functions do not work as they

should, you need to nd a new code.

STEP 5: Once you have found the correct 3-digit

code, save it by pressing the [AUX] button one

more time. The Component LED light will blink

twice to conrm the code was stored. Now when

you press the AUX button, all the buttons will

work with that fth component.

H. Programming the

System On/Off Button

This allows you to program the System On/Off

button so it can send up to ve power On/Off

commands with one button press.

STEP 1: Press the [STB] button.

STEP 2: Press the [SYSTEM ON/OFF] button

and the [OK/SEL] button simultaneously for 3

seconds. The [STB] button will turn on for 30

seconds.

STEP 3: Press the rst [COMPONENT] button

you want to store in the [SYSTEM ON/OFF]

button and then the [POWER] button. Repeat

this for other Components until you have

stored all the desired power commands into the

[SYSTEM ON/OFF] button.

STEP 4: Press the [CH5] button to save the

power commands you stored. The [CBL] button

will blink twice to conrm the commands have

been saved.

I. Programming Channel Control

You can program the channel controls (Channel

Up, Channel Down, Last and Numbers) from one

Component to operate in another Component

mode. Default channel control settings on the

remote control are as follows:

STB: STB TV: STB VCR: STB

DVD: DVD AUX: AUX

If you wish to store the TV channel control in

TV mode, use the following steps.

STEP 1: Press the [TV] button and the [OK/SEL]

button simultaneously for 3 seconds. The [TV]

Component LED will turn on for 30 seconds.

STEP 2: Press the [VOL6] button.

STEP 3: Press the [TV] button again. The

Component LED will blink twice to conrm the

programming.

To return to original state:

If you wish to restore the STB channel control

in TV mode, repeat the above steps but press

[STB] in STEP 3.

J. Programming Volume Control

Volume and Mute control are factory-

programmed to automatically transfer to the

respective Component mode you select, as

follows:

CBL: CBL TV: TV VCR: TV

DVD: TV AUX: AUX

However, you can program the volume controls

(Volume Up, Volume Down and Mute) from one

Component to operate in another Component.

If you wish to store the TV volume control in

STB mode, use the following steps.

STEP 1: Press the [STB] button and the [OK/SEL]

button simultaneously for 3 seconds. The [STB]

Component LED will turn on for 30 seconds.

STEP 2: Press the [VOL5] button.

STEP 3: Press the [TV] button. The Component

LED will blink twice to conrm the

programming.

To return to original state:

If you wish to restore the STB volume control

in STB mode, repeat the above steps but press

[STB] in STEP 3.

K. Programming a ‘Macro’ Button

If your remote model has custom-programmable

Macro buttons available, they can be

programmed to act as a ’Macro’ or Favorite

Channel button in STB mode. This allows you

to program up to ve 2-digit channels, four

3-digit channels or three 4-digit channels that

can be accessed with one button press.

STEP 1: Press the [STB] button to select the STB

mode.

STEP 2: Press the [MACRO] button and [OK/

SEL] button simultaneously for 3 seconds. The

[STB] button will turn on for 30 seconds.

STEP 3: Enter the 2-, 3- or 4-digit code for

the channel you want programmed rst (for

example, 007) using the Number Pad, then press

the [STOP] button. Then enter the code for the

next channel (for example, 050), then press the

[STOP] button. Repeat this process for the third

channel. The [CBL] button will blink once for

each channel entered.

STEP 4: Press the [CH5] button to store the

channels that were selected. The [STB] button

will blink twice to conrm the storage of

commands.

Note: To access the programmed channels,

press the [MACRO] button once. This will bring

up the rst channel. Press once again and it will

bring up the second channel. Press again and it

will bring up the third channel.

L. Low Battery Warning

When the batteries are low and need to be

replaced with fresh batteries, the Component

LED lights will blink 2 times in sequence

whenever a [POWER] button is pressed to turn

on equipment.

M. Memory Lock System

This remote control is designed to retain

programmed memory for 10 years even after

batteries are removed from the remote control.

N. Record Your Component

Setup Codes

TV Setup Code Number:

VCR Setup Code Number:

DVD Setup Code Number:

AUX Setup Code Number:

For additional information about your remote

control, go to www.universalremote.com.

1. Introduction

The CLIKR

™

-5 UR5U-8700L & UR5U-8720L are

designed to operate the Scientic-Atlanta, Pioneer,

Pace Micro, Samsung and Motorola digital Set-

tops, plus the majority of TV, VCR, DVD and

AUDIO equipment on the market as shown below.

CABLE: Cable Converters

TV: Televisions

VCR: VCRs and TV/VCRs

DVD:

DVD Players

AUX: Audio Receivers and DVRs, etc.

2. Replacing Batteries

Before you program or operate the remote

control, you must install two new AA alkaline

batteries.

Step 1: Remove the battery compartment cover

on the back of your remote control.

Step 2: Check battery polarity carefully, and

install the batteries as shown in the illustration

below.

Step 3: Replace the battery compartment cover.

3. Operations

DEFAULT STATE:

Component Default: CABLE Set-top Box

(STB) Channel Default: CABLE channel and

numbers through the CABLE STB. You have

the option of controlling your CABLE channel

and numbers through the TV or VCR. Refer to

section I for programming steps.

Volume Default: Volume and Mute control are

automatically transferred to the respective

Component mode you select, as follows:

CBL:Cable Set Top Box / TV: TV / AUX:

AUX. Volume and Mute control for VCR and

DVD are automatically transferred to the TV.

However, you have the option of controlling

CABLE Volume and Mute through the

TV, VCR or AUX. Refer to section J for

programming steps.

4. Programming

the Remote Control

There are two ways you can program your

CLIKR™-5 remote:

• The Pre-Programmed

3-Digit Code Method

• The Auto-Search Method

• The Learning Method

The Pre-Programmed Code Method allows

you to set up all the buttons at once by

entering 3-digit code numbers that correspond

to a particular Component’s manufacturer/

brand, so it’s the fastest and easiest of the two

methods. (Code Tables are on the backside

of this Instruction Sheet.) The Auto-Search

Method scans through all the codes in the

remote control, one at a time. The Learning

Method allows you to transfer functions from

other remotes, one button at a time.

Important Setup Note:

This pertains to all programming steps. When you

are in setup mode, a component LED will light for

30 seconds. If you do not press a button within 30

seconds, the LED light will turn off and exit setup

mode and you will need to start over.

A. Pre-Programmed

3-Digit Code Method

Step 1: Turn on the component you want to

program (TV, VCR, DVD or AUX).

Step 2: Press the [COMPONENT] button (TV,

VCR, DVD or AUX) to be programmed and

[OK/SEL] button simultaneously for 3 seconds.

The component LED light will turn on for

30 seconds, indicating the unit is ready to be

programmed.

Step 3: Point the remote control toward the

component and enter the 3-digit code number

assigned to your brand.

1 2

BUTTON FUNCTIONS 1

Summary of Contents

Page 1 - BUTTON FUNCTIONS

Operating Instructions forCLIKR™ -5Cable Remote ControlUR5L-8700L-IP Universal Remote Control, Inc.www.universalremote.comOCE-0060G REV 04 (02/26/10)O

Page 2

STB-CABLE ConvertersManufacturer /Brand Setup Code NumberSCIENTIFIC ATLANTA 001 003 041 042 045 046PIONEER 001 103 034 051 063 076 105PACE 001 005

Curtis LED1930A User Manual

Browse online or download User Manual for LED TVs Curtis LED1930A. Universal 8700L Remote Control

Summary of Contents

More documents for LED TVs Curtis LED1930A

Comments to this Manuals

Curtis LED1930A User Manual

Browse online or download User Manual for LED TVs Curtis LED1930A. Universal 8700L Remote Control

Summary of Contents

More documents for LED TVs Curtis LED1930A

Comments to this Manuals

Related products and manuals for LED TVs Curtis LED1930A